Release Notes for Kiralux Compact Scientific Camera Firmware

V1.0.19 - Updates 12/13/2021
Summary:
 1) CS2100M-USB, CS235MU/CU, CS505MUP: Fixes compatability issue with pixel_clock_count_base parameter.
    All other models are not affected.
------------------------------------------------------------------------------------------------------
V1.0.18 - Updates 09/24/2021
Summary:
 1) All Models: Firmware update reduces intensity of rear panel LEDs.
 2) CS505xU1: Adds new model numbers to self-ID code.
 3) CCnnnMU: Adds four-channel defaults.
-----------------------------------------------------------------------------------------------------

V1.0.17 - Updates 08/15/2021
Summary:
 1) CS235xU, CS135xU Only.  Firmware update fixes SFR parameter initialization error.
-----------------------------------------------------------------------------------------------------
V1.0.15 - Updates 07/06/2021
Summary:
 1) CS505MUP Only.  Firmware update corrects a bug that caused polarity angles to be reported incorrectly.
 2) CS505xU, CS895xU, CS135xU frame-rate increase.  
 3) CS126xU minor bug fixes.
------------------------------------------------------------------------------------------------------
V1.0.10 - Updates 05/19/2021
Summary:
 1) CS126MU, CS126CU Only.  Firmware upgrade increases full-frame ROI frame rate to 21.7 fps. 
------------------------------------------------------------------------------------------------------
V1.0.8 - Updates 03/02/2021
Summary:
 1) The reported frametime parameter was double the exposure time, in nframes > 0 mode only, and only on 5MP, 8.9MP, and 12MP models.  That had the effect
   of causing the host system to wait too long for a frame to complete.  The frametime parameter is now equal to exposure time plus readout time.
 2) Fixed a Frame Rate Control bug where the maximum fps rate was not being updated correctly when the roi is changed. Only on 5MP, 8.9MP, and 12MP models.
------------------------------------------------------------------------------------------------------
V1.0.7 - Updates 02/10/2021
Summary:
 1) Added new models.
 2) Added new internal commands.
------------------------------------------------------------------------------------------------------
V1.0.6 - Updates 11/10/2020
Summary:
 1) Enabled Frame-Rate Control Support in conjunction with ThorCam and SDK. 
 2) Fixed bug: In nframes=0 mode and maximum exposure time, first frame took 3x too long to deliver from camera.
 3) Fixed bug: In nframes>0 modes and maximum exposure time, actual exposure time was in micro-seconds, not 10s of seconds as it should have been.
------------------------------------------------------------------------------------------------------
V0.9.3 - Initial Production Release